Removing old grease from kitchen surfaces is perhaps the most time-consuming part of cleaning. When the stains are still fresh and easily washed off, they are not noticeable either on the headset or on the countertop. It is worth the fat to harden - and it is already clearly visible, but it is difficult to wash off. Fortunately, it lends itself to various professional and folk remedies for cleaning kitchen surfaces. How to wash the fat in the kitchen from the headset panels, tiles and countertops?

Headset

As a rule, kitchen furniture facade panels are made with a coating of veneer, plastic or PVC film. These are materials that are resistant to moisture, scratches, shocks, chips, and temperature effects. And, most importantly, they can be cleaned with conventional household chemicals, including those with abrasive properties.

Before removing old grease stains, the panels should be wiped with a sponge dipped in hot water. This is necessary so that the contaminant is soaked and easier to move away from the surface. After 5-10 minutes, you can start cleaning using one of the following products.

  • mustard powder. Mustard perfectly launders grease and is suitable for cleansing not only the kitchen set, but also stoves, sinks, refrigerators, pots and pans. It is undesirable to process only a wooden array with it. To remove grease with mustard, apply it to contaminated areas and rub with a dry cloth. The remains of mustard are removed with a rag or sponge.
  • Soda and laundry soap. In tandem, these universal remedies work better than alone. Soap is a grease remover, baking soda is an abrasive. Rub the soap on a coarse grater, fill with water until a cloudy solution is obtained and wipe the contaminated areas with it. Sprinkle baking soda on top, rub a little and leave for 20 minutes. Rinse off the cleaning products with a sponge afterwards. The method is also suitable for metal surfaces.
  • Soda and sunflower oil. The second component will help wash the fat no worse than soap. To prepare a cleaning solution, dilute baking soda in oil in a 2:1 ratio. Get a composition with the consistency of sour cream. Apply it to the grease spots with a sponge, preferably with a soft brush, and leave for 15 minutes. Afterwards, remove the remnants of the product from the panels with a damp cloth.
  • Ammonia. Dissolve a tablespoon of ammonia in a liter of water, pour into a spray bottle and spray on contaminated surfaces. Leave the mixture for a short time so that it dissolves the fat, open the window so as not to suffer from a specific smell. Then remove the solution with a damp cloth.
  • Alcohol and vinegar. Alcohol is a universal grease solvent with a sterilizing effect. Mix two parts of water and one part of table vinegar and alcohol. Optionally, you can add 10 drops of any essential oil for aromatization. Type the mixture into a spray bottle, spray on the surface of the headset and leave for 15 minutes. The fat will dissolve, and it can be easily removed with a damp sponge, and a pleasant aroma will reign in the kitchen.

Tile

The tile in the kitchen, especially if it is decorative, requires careful maintenance. It must not be cleaned with metal brushes and sponges, as this may damage the surface. For tiles, special scrapers and household chemicals are produced that allow you to maintain shine. If we are talking about expensive tiles, it is better to clean it with compositions for ceramic coatings. For example, Shumanit, Sanita, Mister Muskul and others.

Tiles can be cleaned of old grease with steam generator. First, pour hot steam over the contaminated places, and then wipe them with a wet rag or sponge. This method does not require the use of household chemicals.

Another effective tool for a smooth surface - melamine sponge. It acts like an eraser, adheres well to dirt and gently removes them. It is only necessary to moisten the tile so that the stain of fat gets a little wet, wet the sponge and rub it on the contaminated places.

How can you wash the fat in the kitchen from such a delicate surface? From folk remedies, those that do not have an abrasive effect are suitable:

  • Laundry soap. Lather them with a sponge and walk over the contaminated surface.
  • Vegetable oil. Apply to dirty areas for a few minutes and wipe off with a sponge.
  • Mustard powder. Quite a delicate abrasive that is suitable for tiles. Dilute it to a paste or use liquid mustard, apply to the tile, leave for 10 minutes, and then clean with a damp sponge;
  • Alcohol. Moisten greasy dirt with it liberally, rub and immediately rinse off the residue with water.

solid wood

The wooden surfaces of the kitchen set require the most delicate handling, otherwise the color or texture will suffer. Solid wood kitchen sets are best cleaned with special wood surface care products. From folk remedies, the following are suitable.

raw potatoes. The tuber is divided in half and the contaminated area is rubbed in halves, then the trace is removed with a wet cloth. The method is quite laborious and is suitable only for small contaminants, but it can be used on polished surfaces.

pharmacy talc. Sprinkle the powder on a damp sponge, wipe the contaminated areas. Residues are removed with a dry cloth. The method is suitable for delicate polished panels.

4.25 out of 5 (8 Votes)